Month: October 2025

Initial Look at the New Tax Form Schedule 1-A: Four Key Deductions for 2025

The IRS has released draft Schedule 1-A, introducing four new temporary deductions within the One Big Beautiful Bill Act. If you are wondering what the new form looks like and how the calculations work, read on as we explore each below.

Modified Adjusted Gross Income (MAGI)

It is important to note that all four deductions require calculating your MAGI first, which determines eligibility and phaseout amounts for each deduction.

The Four New Deductions and How the Calculations Work

These deductions are all referred to on the schedule by their colloquial names, for example: “No Tax on Tips,” “No Tax on Overtime” and “No Tax on Car Loan Interest.” The sole exception, however, is popularly referred to as the “No Tax on Social Security” provision, which is called the “Enhanced Deduction for Seniors” on the form.

1. Tips Deduction

  • Maximum: $25,000 annually
  • Eligibility: Must receive qualified tips in customarily tipped occupations
  • Phaseout: Begins at $150,000 MAGI ($300,000 joint filers)
  • Rate: $100 reduction per $1,000 over threshold
  • Requirements: Valid Social Security number; married couples must file jointly

2. Overtime Deduction

  • Maximum: $12,500 single ($25,000 joint filers)
  • Eligibility: Only the premium portion of overtime pay (the “half” of time-and-a-half)
  • Phaseout: Same as tips deduction – begins at $150,000 MAGI
  • Rate: $100 reduction per $1,000 over threshold

3. Car Interest Deduction

  • Maximum: $10,000 annually
  • Eligibility: Interest on loans for new vehicles under 14,000 pounds and assembled in the United States
  • Phaseout: Begins at $100,000 MAGI ($200,000 joint filers)
  • Rate: $200 reduction per $1,000 over threshold
  • Requirements: Must provide VIN; loan must originate after Dec. 31, 2024

4. Enhanced Deduction for Seniors

  • Amount: $6,000 fixed deduction
  • Eligibility: All taxpayers (replaces “No Tax on Social Security” promise)
  • Phaseout: Begins at $75,000 MAGI ($150,000 joint filers)
  • Rate: 6 percent reduction of excess income over threshold

Key Points to Remember

  • All deductions are available whether you itemize or take the standard deduction
  • All require valid Social Security numbers
  • Married couples must file jointly to claim these benefits
  • Income limits mean higher earners receive reduced or no benefits
  • These are deductions, not exclusions – income is still reportable for state/local taxes

Final Steps

After you have calculated everything applicable for the four possible deductions, you will enter the total on the new line 13b on Form 1040. The total amount of the deductions entered here is removed from your income prior to calculating your tax. Remember, these are deductions and not credits, so they only reduce your taxable income and are not a direct reduction in your tax due.

You can see an example of the new draft Form 1040 illustrating this below.

Screenshot of new Form 1040

Conclusion and Draft from Status – and IRS Warning

The above provides guidance to taxpayers and professionals on how both the deductions calculations work and flow through Form 1040. The IRS warns, however, that the forms and instructions currently released are in draft form at this point. Before any forms or instructions can be released in their final state, they need to be approved by the OMB. It is not unusual for draft releases of instructions and publications to have some changes before their final release, even if only minor.

 

Understanding Contribution Margin After Marketing

Contribution margin after marketing (CMAM) measures how much money is generated per unit retailed after factoring in a company’s variable costs, along with marketing costs.

It’s analogous with contribution margin, however, a business must factor in marketing costs the company experiences when publicizing a good to likely consumers with details on the business’ wares. This metric determines how well net sales can satisfy expense obligations and what percentage of net sales may remain to satisfy fixed expenses.

Comparing Variable Versus Fixed Costs

Variable costs, as the name implies, are expenses that rise and fall according to output quantities. Fixed costs, conversely, are expenses that don’t change despite variation of production quantities. Understanding these concepts is helpful when calculating CMAM to see how both types of expenses impact the different calculations.

CMAM= Sales Revenue – Variable Costs – Marketing Expense

It also can be determined on a per unit basis to help a business understand how a single product unit contributes to the company’s comprehensive profits. One can calculate the CMPU (contribution margin per unit) as follows to provide a more granular analysis:

CMAM/Unit = Sales Revenue/Unit – Variable Expenses/Unit – Marketing Expense/Unit

What separates variable costs (including marketing expenses) and the sales revenue is CMAM. The balance is profit along with fixed costs. To calculate if a business saw a net loss or profit, the formula is:

Net Operating Profit = CMAM – fixed costs

If a profit is reported after subtracting variable costs, costs to market, plus fixed costs, it means a business or specific department is profitable. If it’s negative, the business sees a loss that won’t enable it to pay its bills.

Illustrating CMAM

When it comes to a company producing widgets, the following is already known. Variable costs for production for a single widget are detailed below:

  • $2.25 for unprocessed inputs
  • $1.80 firsthand production expenses
  • $0.50 power
  • $0.40 freight expenses
  • $4,500 business equipment rentals
  • $6,000 factory rent
  • $30,000 management salary
  • $10,000 marketing costs

Each widget cost $10, and the business sold 30,000 last year. Therefore, it’s calculated as follows:

CMAM = Sales Revenue – Variable Costs – Marketing Expense

Sales Revenue = $10 x 30,000 = $300,000

Variable Costs = ($2.25 + $1.80 + $0.50+ $0.40) x 30,000 = $4.95 x 30,000 = $148,500

CMAM = $300,000 = $148,500

The next step is to calculate net operating loss or profit: we take CMAM ($148,500), then subtract fixed costs:

$148,500 – ($4,500 + $6,000 + $30,000)

$148,500 – $40,500 = $108,000

Based on that calculation, the company producing widgets realized $108,000 for their net operating profit last year The next section will discuss how businesses can use this information to improve their operations.

Using CMAM for Business Analysis

Managers use this metric to determine the viability of a product. If there are multiple iterations or options of a product, it can help managers determine which product sells the best and rank them if there are multiple versions of a widget. Businesses can analyze each unit’s contribution margin for each version of a widget to determine which versions provide the greatest option for profitability. Depending on the outcome, the company may choose to produce only the most profitable one or two widgets.  

When it comes to the CMAM, businesses that use it for analysis can increase their sales efficiency for the present and future.

How to Save Money with the Half Rule

What if you could lower your grocery bill without giving up the things you love, fight inflation and have some money left at the end of the month? Sound too good to be true? It’s not. It’s the Half Rule. This means cutting the amount of product you use in half and seeing what happens.

Truth is, most of us probably use too much of the things we love. Here are several reasons why:

  • Manufacturersoften ask you to use more of the product than you need;
  • You’ve probably gotten used to using a certain amount of a product;
  • And finally, product inflation. Specifically, you might think if you get pleasure out of something, you might need to use more of it. For instance, why get a tall vanilla latte when you can get a grande, right? But ask yourself: Is it really that much better?

To this end, here are some things you can easily use half of and never miss the other half:

  • Shampoo. Try using half the amount and adding more water, especially if it’s concentrated.
  • Laundry detergent. Try a half cup. A little goes a long way, especially if it’s a small load.
  • Dryer sheets. These are so easy to tear in half.
  • Cooking oil. Use an oil mister instead of pouring it into your pan or skillet.  
  • Restaurant meals. Eat half or a third and save the rest for another meal. Or better yet, split a meal with your partner, friend or work colleague. Bonus: you’ll also save calories.
  • Bagels. Just eat half! Save the other half for your next snack or breakfast.
  • Starbucks order. Try a tall. Or if you get a vente, try a grande. Give it whirl. See what happens.
  • Glass stovetop cleaner. If you use less, you might have fewer streaks.
  • Tape. When you’re wrapping gifts, give string a try.

When you change a few things here and there, over time you’ll really see the difference in your bank account. Also, imagine how nice it’ll feel not to have to buy these items so often. That’s a big change in spending.

The Half Rule is not for everything. While it works on so many things, there are some things you cannot to apply it to – like filling up your gas tank or cutting a prescription in half. Never do that.

Overall, it’s a good rule. And when you’re persistent over time, you’ll start to develop a habit – one that will help you see a difference quickly and save you money in the long run. It’s a ripple effect that might expand into other areas of your life. In sum, the Half Rule is so effective, you just might go all in – and stay there.

Sources

“The Half Rule” – A Frugal Hack I Live By

The Silent Threat: How Simple Misconfigurations Are Fueling 2025’s Worst Cyberattacks

As organizations invest heavily in next-gen firewalls, AI detection, and threat intelligence, grave cyberattacks have been reported as a result of overlooked misconfigurations. According to the latest statistics, about 23 percent of cloud security incidents are directly connected to misconfigurations. These missteps create easy entry points for cybercriminals that may lead to data breaches, ransomware demands, and financial loss.

What are Misconfigurations?

Misconfigurations are overlooked errors in system setups that create vulnerabilities without the need for hackers to apply advanced hacking techniques. These silent threats are human-driven oversights when configuring software, hardware, or cloud services. Good examples include improperly set permissions in cloud storage, insecure API keys left in code repositories, inadequate security monitoring, and unsecured access points like IoT devices with default passwords.

These issues arise from human error, which accounts for 82 percent of misconfigurations. This is also compounded by today’s cloud era – where businesses depend on cloud platforms, software as a service stacks (SaaS), and AI-driven infrastructure. Many organizations now use multiple providers, and this makes configurations challenging. Rushed deployment also adds to the misconfiguration problem, especially when a thorough audit is not conducted. Unlike malware or phishing scams, misconfigurations remain undetected until exploited.

2025’s Worst Cyberattacks Fueled by Misconfigurations

This year alone, there has been a surge in the incidents related to misconfiguration, which is alarming. There were more than 9.5 million cyberattacks in the first half of the year. A good example is the Coinbase breach of May 2025, in which data from more than 70,000 customer records was stolen. This breach is attributed to insider threats exploiting misconfigured permissions.

Recently, cybersecurity researchers revealed a botnet campaign that exploited misconfigured DNS sender policy framework (SPF) records across 20,000 domains, and compromised more than 13,000 MikroTik routers. This enabled large-scale spam and spoofing attacks.

In many regions, misconfigured VPN gateways and remote access tools have also contributed to ransomware campaigns. This is through attackers bypassing perimeter defenses by exploiting a misconfigured VPN portal.

IoT weaknesses have also seen entire networks of smart devices compromised, simply because administrators did not change the default login credentials. The entry points ranged from security cameras to industrial sensors, allowing attackers to access more sensitive corporate systems.

Why Organizations Keep Making the Same Mistakes

  • Talent shortage – Many IT teams are stretched and lack sufficient experts to catch every misstep.
  • False confidence in automation – While automated tools are a great help, they are not foolproof. Overreliance on these tools and having a set-and-forget mindset can leave room for security breaches.
  • Velocity over security – This happens when rapid delivery of product features overshadows the slower discipline of security reviews.
  • Siloed responsibility – In many organizations, security is delegated to a separate team instead of embedding it across different units like the development, operations, and business units.
  • Awareness gap – Many teams underestimate how a single overlooked setting, like an open test environment, can escalate into a full-scale breach.

Prevention Strategies and Best Practices

Fortunately, misconfigurations are one of the preventable causes of security breaches. Preventing misconfigurations requires proactive measures that include:

  • Continuous auditing and testing – It is crucial to ensure regular audits and testing of automated tools for configuration management to detect and reduce the window of exposure.
  • Adopt zero-trust models – No device or user should be trusted by default; grant only minimum access where required.
  • Strengthen access controls – Always change default device credentials, partition networks, and enforce MFA across all accounts.
  • Automated detection tools – Use cloud security posture management, compliance-as-code, and drift detection to catch misconfigurations in real time.
  • Cross-functional training and culture – Employee training is vital, as human error accounts for 82 percent of incidents. Security literacy should extend to both technical and non-technical teams.
  • Follow industry guidelines – Align with recognized security frameworks (NIST, ISO, CIS) and CISA’s published guidance on the Top Ten Cybersecurity Misconfigurations. For example, avoid using default configurations, enforce patch management, and properly segment networks.
  • Incident response readiness – Have a well-drilled response playbook to ensure minor disruption in case the defenses fail.

Conclusion

Simple misconfiguration remains a silent enabler of devastating cyberattacks through avoidable errors. Business owners must prioritize configuration hygiene to build resilient digital infrastructures and protect against future threats.

It is a clear lesson that cybersecurity doesn’t always depend on battling sophisticated hackers but rather ensuring they don’t get an easy way in.

Enhancing Homebuyer Protections, Wildfire Risks, 911 Response and Domestic Manufacturing

Homebuyers Privacy Protection Act (HR 2808) – Introduced by Rep. John Rose (R-TN) on April 10, the House passed this bill on June 23, and the Senate passed it on Aug. 2. Signed into law on Sept. 5, this bipartisan bill prohibits a consumer reporting agency from selling a mortgage applicant’s personal information to other lenders without their explicit consent. The legislation is designed to safeguard homebuyers’ personal financial information and eliminate the frequent bombardment of other lender marketing offers during the financing process underway with the applicant’s existing lender.

SUPPORT for Patients and Communities Reauthorization Act of 2025 (HR 2483) – This bill renews billions of dollars in federal funding for programs responsible for preventing overdoses and further strengthening treatment and recovery services. The renewal of funds to nationwide county programs is timely given the current behavioral health and substance abuse disorder crises. The bill was introduced by Rep. Brett Guthrie (R-KY) on March 31, passed in the House on June 4 and in the Senate on Sept. 18; it currently awaits signature by the president.

TRAVEL Act of 2025 (HR 3400) – Also known as Territorial Response and Access to Veterans’ Essential Lifecare Act, the purpose of this bill is to enable VA physicians and specialists to travel to hard-to-reach areas in U.S. territories for up to one year. The Act is designed to help fill critical gaps in VA medical services across the Pacific territories by compensating providers with travel bonuses. The legislation was introduced by representative Kimberlyn King-Hinds (R-Northern Mariana Islands) on May 14. It passed in the House on Sept. 15 and currently lies with the Senate.

Fire Ready Nation Act of 2025 (S 306) – Introduced by Sen. Maria Cantwell (D-WA) on Jan. 29, this legislation would establish a fire weather program at the National Oceanic and Atmospheric Administration (NOAA). The new program would enable scientists to better predict wildfires, fire weather and fire risk via forecasting, detection and modeling, as well as respond quickly to prevent devastation to families, homes and businesses due to wildfires. The legislation was passed in the Senate on Sept. 10 and is now under review in the House.

Enhancing First Response Act (S 725) – This bill was introduced on Feb. 25 by Sen. Amy Klobuchar (D-MN) and passed in the Senate on Sept. 10. The law would reclassify 911 dispatchers as public safety workers from their current role as office and administrative support in the federal Standard Occupational Classification system. In addition, the bill contains provisions to improve access to the 911 call system during major disasters and make the system more resilient against outages and disruptions. The fate of this bipartisan bill now rests in the House.

National Manufacturing Advisory Council Act (S 433) – This Act was introduced by Sen. Gary Peters (D-MI) on Feb. 5. It seeks to establish a working group of representatives from industry, labor and academia to advise Congress on policies and programs to enhance domestic manufacturing despite the challenges of global competition, U.S. supply chain issues and the current tariff solution. The bipartisan legislation passed unanimously in the Senate on July 14 and is currently under review in the House.

A Look at the Nonaccrual Experience Method

When it comes to running a business, having outstanding invoices that turn into uncollectible receivables or simply bad debt is a fact of life. The Internal Revenue Service (IRS) has a safe harbor that permits businesses to reduce consideration of such bad debt from taxation, if it qualifies. However, understanding how to determine if a business is eligible is essential to making the most of it when a business files its taxes.

Defining the Nonaccrual Experience Method (NAE)

When businesses perform a service, they expect to be paid. However, they sometimes have unpaid invoices that are uncollectible. One provision within the IRS’ Internal Revenue Code (IRC) is that of the nonaccrual experience method (NAE) and how it intersects with bad debts.

How It Works      

Once a company sees bad debt in its system after customers fail to pay their invoices, it calculates the amounts it projects it won’t be able to collect. Projecting bad debt is accomplished by the company looking at previous experiences with its payees. It’s important to note that this accounting is used by businesses for only a portion of their projected uncollectable customer bad debt; businesses similarly project the remaining percentage they expect to collect from outstanding invoices in the future.   

One important step for businesses to determine their eligibility for relief from the accrual segment of uncollectible revenue, per the U.S. Security & Exchange Commission (SEC), is by determining their industry classification. Sample industries include legal professionals, engineers, performance art professionals, architects, and actuaries.

It’s important to note that if businesses don’t use this method, they may charge off such debts. Charge-offs are when a company writes the debt off its balance sheet and expenses the uncollectible funds on the income statement. Companies must also adhere to the following criteria to take advantage of the safe harbor:

  • The company must currently use the accrual method of accounting when recording revenues, and not the cash method to account for revenue.
  • The company, in a single year, within the past 36 months, has earned up to, but no more than $5 million in gross receipts.

IRS Guidance

Beginning in September 2011, the Internal Revenue Service permitted taxpayers to use the NAE method to determine applicability by applying a factor of 95 percent to their allowance for bad debts via their past 60 months of financial documents. This permits businesses to exclude qualifying uncollectible revenues from their taxable income, which is beneficial for lowering the amount of taxes owed. It is often easier for NAE-specific designated industries to qualify; however, only companies with the appropriate amount of historical information to substantiate are eligible.

Further Considerations and Conclusion

One example of this safe harbor includes having financial information that’s expertly tracked for the past 60 months via financial statements. If the company can’t substantiate it, they won’t be able to qualify. Similarly, eligible services provided or the resulting receivables that have interest and/or financial penalties attached, are ineligible.

When it comes to navigating the IRS code, the NAE can provide another way for eligible companies to maximize filings and tax obligations.